Entrance Signs
Oak Framed with Posts

These wooden framed signs are beautiful as entrance signs for large houses, farm or business.  Using a combination of traditional English oak with modern aluminium composite we have created an elegant sign to grace any entrance.

We have four standard sizes of entrance sign which should suit most properties. The posts can have gothic points as shown in the photo to the right or standard tops. The Yelland Farm entrance sign is our medium size - the aluminium composite panel being 375mm x 600mm. This suits most farms or large houses.

Colours - As well as black and white we have all the colours listed below.

RAL6005 Moss Green, RAL1003 Signal Yellow, RAL1015 Ivory, RAL3020 Traffic Red, RAL3004 Purple Red, RAL5002 Ultrmarine Blue, RAL5017 Traffic Blue, RAL 9006 Silver Grey, RAL7015 Slate Grey

NB The board is matt on one side and gloss on the other. On single sided signs, unless otherwise specified, we will use the matt side. On double sided signs one side will be gloss and one matt. However it is possible to have both sides gloss or matt by using two boards back to back, but this will cost a little more.
The lettering is available in a large range of colours and a huge range of fonts.

The oak is usually treated with a tough satin varnish and finished with woodcare milk. Another alternative are the painted hardwood posts and frames. The standard paint colours are black, white, Farrow and Ball Lichen (light green) and Purbeck (light grey) There are other stock colours @£5

Other Sizes and Panels

As always, we can make bespoke entrance signs. You can use any of our sign boards for the panel. An interesting option is the stone-like 6mm engraved corian, or maybe a panel with reflective lettering or two lettering colours. Another possibility is a full colour printed panel, but please note that as with all full colour printing outdoors it will slowly fade over time.

Apart from the different panel types we can also make entrance signs to any size.  To price these just add the cost of the panel, the posts, top and bottom rails plus £16.50 for the four joints. We can finish the posts tops gothic,bevalled or with post caps.

These signs can be erected by simply digging holes and back-filling.

Alternatively you could use our posts holders. We have post holders with spikes that can be hammered in with a sledge hammer, bolt-down post holders for fixing onto existing concrete and concrete-in post holders for exposed areas. We advise against concreting your sign directly into the ground.

Painted Entrance Signs
on Posts.
These can be made in solid oak or with oak posts and tricoya sign as shown to left.
Available in white / black or in one of our stock colours.

Solid Oak Entrance Sign with Engraved Corian Insert.
These are the most expensive entrance signs and they do look amazing. They will also be the longest lasting.