 |
This top quality engravers brass is available in three thicknesses - 1.5mm, 2mm & 3mm. These can be up to any size up to 24" (600mm). Lettering can simple be engraved or providing the letters are at least 10mm in height they can be infilled with one of our standard colours. Backing boards are available if required in a variety of timbers.
|
 |
There is a range of stock sizes cut from the 1.5mm brass.They are available as just the brass plaques or mounted on Oak or Mahogany backing boards. As with all the engraved signs there is a large range of fonts from which to choose from. Can be paint filled or left unpainted.
|
 |
 |
These can be cut to any size and are made from 2mm or 3mm brass. They are available with or without backing boards .Lettering is available in a wide range of fonts.
|
 |
The anodisal aluminium has a tough baked gloss finish. The letters are engraved through this finish to show the silver / white surface beneath. As we use a laser for this process the lettering can be very small if it is required. We can also use very detailed images including line drawings and even good quality photos.
|
 |
A modern material with a cold stone like finish. It is very durable, fade proof and vitually maintenance free. It comes in a variety of stone finishes including slate and in two thicknesses. It also has the advantage of being able to engrave and paintfill, smaller letters than you can with brass or laminate. Letters can be paint filled with black, white, silver, gold or blue.
|
 |
Ideal for small text, images with fine detail or if several colours are needed. The main benefit of chemical etching over engraving is no mechanical stress to the material and no cutter marks as the unwanted material is removed by chemicals leaving clear sharp flat surface detail. Not as cost effective for small signs unless there is a large amount of text.
|
 |
 |
The silver anodised aluminium is ideal for the more contemporary nameplate and has the advantage of being tarnish free. It can be engraved in a range of fonts looks very stylish if mounted on a wooden backing board. The letters are best infilled with black or blue.
|
 |
Classic top quality engraved brass or modern anodised aluminium on a solid wood bar. Personalise the desk name plate sign to suit your situation. You choose the font, the layout and if you like, we can even include an image.
|
 |
 |
More expensive than other materials, but becoming ever more popular. Easy maintenance. As with the brass, aluminium and acrylic, logos can be included and they can be supplied with or without backing boards. A slightly cheaper alternative with the advantage of being able to use very small text is Laser Engraved Stainless Steel
|
 |
These tough and maintenance free stainless steel plates can be used in many situations where small text or detailed artwork is required.. Even good quality photos can be used. Although not engraved into the metal the lettering is permanent and as tough as the metal beneath.
|
 |
These signs outdoor information signs and name plates. They are very durable - made from 2 ply 3mm exterior grade flexable acrylic which is weather proof and UV resistant. The letters are engraved through the first layer of laminate to show the colour underneath. They can also be used for Maintenance Free House Signs
|
 |
This type of laminate is 1.5mm thick, so not as robust as our 3mm Standard Engraved Laminate. However it has the advantage of being able to use small text and detailed images. It still can be used outside and is ideal for all kinds of use and commemorative and memorial plaques to office nameplates.
|
 |
These signs are ideal for maintainence free memorial plaques. The letters are engraved through the first layer of laminate to show the colour underneath. The silver and black looks very appropriate, especially if mounted on a wooden backing board.
|
 |
These sturdy moulded plaque holders measure 295mm in height and hold a 1.5mm thick engraved 119 x 68mm. They are ideal for plant stakes, grave markers and memorial tree stakes. The plaque is included in the price. Materials include brass, aluminium, stainless steel and acrylic laminate.
|
 |
Brass is the traditional material for memorial plaques. Usually they are engraved in a script font with unpainted letters. However we can use other fonts and with letters over 10mm high we can infil with black, white, blue, green, orange, yellow or red.. We also have wooden backing boards and tree stakes if required.
|
 |
These plaques are ideal for memorial plaques as they look smart and are are maintainence free. They are made from 1.5mm black anodised aluminium. The letters are engraved through the black layer of laminate to show the silver colour underneath.
Backing Boards, Tree Stakes and Wood Crosses |
 |
Tactile signs are used by people with sight impairment. They have raised letters and symbols that can be easily felt with the fingertips and look very attractive at the same time. Each sign also has braille letters. We have signs in all the common colours but the blues are the most popular.The background is a matt non glare finish.
|
 |
Real Wood Veneers - Oak, Maple, Ash and Cherry - on Black Core - Ideal for Hotels, Offices, Department Stores, Shops and Doctors Surgeries, Interior use only - 9mm thickness |
 |
Our engraved wooden plaques are very elegant and very beautiful. Plaques made from wood feel very natural and are often more appropriate to use than the rather formal engraved metal.
|
 |
These beautiful plaques can be made in a variety of sizes using Oak or Iroko. For outside use Iroko is often considered preferable as it is full of oil. Oak is also used as it is very beautiful but must be well maintained to stay looking at its best. Wording and images are engraved into the wood using our latest laser technology. The results are simply stunning..
|
|
