Care of Magnetic signs
Before You Apply Magnetic Signs
The magnetic sign and metal surface should be clean and dry. In any outdoor
application, such as car signs,ideally the metal surface should be waxed
2 days before application.
Application Tips for Magnetic Signs
Magnetic Sheeting holds best to flat surfaces and surfaces with slight curves.
When the magnetic signs are placed in the wrong position, remove the sign
and realign. Do not pull the magnetic sign to realign when it is against
the surface, as the material may stretch due to resistance cause by the high
magnetic strength. Make sure the entire magnet is against the metal surface
(no air pockets). Do not apply to newly repainted surfaces. (90 days for
paint, 60 for clear)
Cleaning Magnetic Signs
Some moisture and dirt could collect behind magnetic signs. Remove and clean
both the signs and the surface with mild detergent and allow both to dry.
Repeat cleaning process weekly when used in an outdoor environment.
Storing Your Signs when not in use The magnetic sheet
is more pliable and easier to work with when it is near room temperature
when applied. The best way to store magnetic signs is flat. Avoid laying
signs on protruding objects. Make sure it is clean.
Click here for details of our Magnetic Signs
