Fibreglass Signs - Colours and Fixing Systems
The boards are manufactured in sixteen colours plus black and white. The colours are a shade guide only as the actual signs are much richer and brighter as you would expected from pigmented fibreglass.
Alternatively have a look at the SM Range of fibreglass signs which are available in any RAL colour.
Fibreglass Sign Board Prices Order your Fibreglass Sign Now
Type A - The board is supplied without holes or brackets. It can be fixed with screws through the face. An alternative method of wall-fixing is to use two battens of wood top and bottom, and fix these to the wall and then the sign to the wood. This entails screwing through the top and bottom of the sign and so not marking the face.
Type B - These small fixing brackets can be supplied with the sign at no extra charge.
Type C - Channels are fixed to the back of the sign and the sign is then attached to round posts using post mounting brackets.
Cost for 2 channels - £29.50
Cost of 2 pairs of post mounting brackets - £29.50
Type D - Brackets are fixed to the back of the sign which can be used to bolt onto square posts and rails. £29.50 for 4 brackets
The above signs have two different edge styles. The smaller signs tend to have the louvre edge (A); while the larger signs have the bull-nose edge (B).
Cross section of the louvre edge (A)
Cross section of the bul-nose edge (B)
|Back to main Fibreglass Signs Page|
|Need some help - Call us
9.30am - 4pm
Didn't find what you were looking for?
Click on full colour Site Map or use search engine below
|If all of the telephone lines are busy click here for contact details of each department. Meet the team|